Since their inception and adoption, using a USB port on a laptop has been a time-saver. USB ports in laptops have been rendered useless in multiple reported cases, either due to user error or as a result of device failure.
Using this guide, you’ll learn How to Fix USB Ports on Toshiba Satellite Laptop that isn’t functioning.
Observe the USB Port’s Errors:
Check if the port is causing the problem, not the device you’re connecting to. Troubleshooting the port is necessary to determine what’s wrong. It involves testing the port. Can use an alternative port to begin with. As long as the gadget goes undiscovered, there is a problem with the first port.
If one of the following occurs, you’ll know there’s a problem with your port:
- Unfortunately, the gadget isn’t being recognized.
- An error message relating to a device is shown by your operating system (removing and replacing the device might solve this).
How to Fix USB Ports on Toshiba Satellite Laptop?
In case of a Loose USB Port:
First, let’s discuss what to do if the USB port on your laptop is loose before we move on to the various software solutions. The ports on your computer are soldered onto a printed circuit board (PCB). It may be the motherboard, but a secondary printed circuit board is more likely to be the culprit (PCB).
After significant use, ports may become movable or perhaps get disconnected entirely. It is frequently because of the shape of the USB devices that have been connected. On the other hand, things are somewhat different in older memory drives known as “sticks.”
Although low-powered Wi-Fi and Bluetooth connections and modern USB flash memory are not anticipated to impose any significant pressure on the port’s physical connection, older memory drives known as “stick” drives do. The size and weight of USB cables act as a lever responsible for the USB ports becoming loose. Another culprit is USB cables.
If you suspect that a port on your motherboard is faulty, it’s not easy to repair it. Desktop computers may have an easy-to-swapped-in replacement board. The USB port on your laptop may need improvement. You’ll need a soldering iron for this project.
It is possible to get it repaired by a professional, but this will be expensive. If you plan to solder yourself, make sure your know-how. If you’re unsure, start looking at the available software patches.
Read Also: How to Convince Your Parents to Get You a Laptop?
Step By Step Guide
If you’re curious about How to Fix USB Ports on Toshiba Satellite Laptop, keep reading this article. Then take the steps outlined in the following paragraphs:
Step#1: Visiting Toshiba’s Help Site
Make sure you’re running the latest BIOS for your Toshiba Satellite laptop by visiting Toshiba’s help site with your laptop model and SKU.
Step#2: Remove the Previous Version
You can check to see any updated updates and then download and install them. Depending on your platform, you may be asked to remove the previous version during the installation process.
Step#3: Insert the Device
Move the device to a different port on the laptop to rule out a specific port or port as the source of the problem. To rule out the USB ports as the source of the problem, insert the devices in issue into the ports of a donor system.
Step#4: Find USB Controller
Device Manager>Universal Serial Bus controllers is where you’ll locate USB controllers. Choose effects from the context menu of the right-clicked USB Root Hub. Should handle each USB Root Hub listed under Universal Serial Bus controllers the same way.
Step#5: Press the “OK”
- Press the “OK” button.
- Reboot your computer. If that doesn’t help, perform the above steps again, but delete everything you’ve installed this time.
- Restart your laptop by going to the list of Universal Serial Bus controllers.
Attempt the steps above again, and if the ports still aren’t responding. It would help to disconnect the AC power adapter from your laptop. Remove the battery from Your computer.
For at least 30 seconds, keep the power button pressed. To reset a laptop with an internal battery that has been mounted or sealed, turn off the power, flip the computer over, and look for a pinhole under the laptop. Ensure that your USB ports are working correctly by replacing the battery and AC power source.
Windows 10 Toshiba Satellite USB Ports Not Working
Continue reading this article if you find the solution to” Toshiba Satellite USB Ports Not Working Windows 10”.
Method#1: Check Whether the Device Itself Is Defective
If the USB device was functioning before the Windows 10 upgrade, it is unlikely to be defective. But coincidences do occur. It is entirely feasible that your equipment malfunctioned simultaneously with the Windows upgrade. Before devoting effort to more difficult debugging, it is best to eliminate this possibility definitively.
To determine whether the USB device is defective, unplug it (or ‘Eject’ it if it’s a USB storage device) and connect it to a different computer. If it functions, the device is acceptable. If not, then you have identified the problem! Purchase a replacement.
Method#2: Verify the USB Device Drivers
Your USB ports may not be working because of a driver problem. As a last resort, if the procedures above don’t work or you aren’t confident in dealing with drivers manually, you can use Driver Easy to accomplish it.
There’s no require for you to do anything other than install Driver Easy. To avoid installing the wrong driver or making an error during the installation process, you are not required to be aware of the specific operating system on your laptop.
Driver Easy’s free and pro versions allow you to update your drivers automatically. You can also get complete assistance and a 30-day money-back guarantee with the Pro version, which requires only two clicks:
Read Also: How to Clean Alienware Laptop Keyboard?
- Driver Easy can be downloaded and installed.
- Click the Scan Now option in Driver Easy to begin scanning your device. To find any problematic drivers, run a scan with Driver Easy.
- To download and install the newest version of a USB drive that has been reported, click the Update icon to come it (you can do this with the FREE sight).
- Alternatively, you can select “Update All” to download and install a new version of all the missing or out-of-date drivers on your system (you’ll be prompted to upgrade when you select this option).
FAQs- How to Fix USB Ports on Toshiba Satellite Laptop?
What Causes USB Ports to Stop Working?
The Selective Suspend option may cause the USB device to become unresponsive. A function called Selective Suspend suspends the USB device so that the computer can turn off the USB device to conserve battery life more effectively. This capability may fail to awaken a USB device on occasion properly.
How Do I Reinstall USB Ports?
Uninstall one device at a time by right-clicking on it and selecting Uninstall. To remove the app, click the Uninstall button. You must reboot your computer after deleting all USB device drivers from the Universal Serial Bus controllers. Windows will then install the USB drivers.
Is It Feasible to Replace USB Ports on a Laptop?
With basic mechanical know-how, you can easily change the USB port on your computer if you have a problem with it or need more connections.
When your Toshiba Satellite laptop’s USB ports stop working, you want to know How to Fix USB Ports on Toshiba Satellite Laptop. It’s then up to you to follow simple instructions, such as inspecting the problem and attempting to remedy it. Check the device manager and uninstall the USB controller after that. Also, turn off the power-saving mode.