How to Disassemble Toshiba Satellite C655 Laptop Easy Guide

Disassembling a Toshiba Satellite C655 Laptop is not that challenging. So if your primary concern is to acknowledge yourself about How to Disassemble Toshiba Satellite C655 Laptop? You may find detailed step-by-step disassembly guidelines for Toshiba laptops on this website. Use these tips if you need to fix your laptop, change parts, update your computer, or clean it. Make it for sure to bookmark this page because you won’t find these guides anyplace else.

Toshiba Satellite C655 Laptop Specifications:

Toshiba produced this laptop under the Satellite C-series, which covers all of the Satellite family’s most basic laptops. There’s a high-definition 15.6-inch screen on this laptop. Cache memory is installed on the laptop’s AMD E-300 dual-core processor. There are two memory slots in the Toshiba Satellite C655 model that can read SD, SDHC, and miniSD cards. It has a 320-gigabyte hard disc. One charge lasts for up to 5.9 hours on the computer’s lithium-ion 48-watt-hour six-cell battery.

An integrated multi-touch touchpad keyboard is included with this laptop. A microphone, headphones, and VGA inputs and outputs are all included on this device. “Toshiba” is printed in silver capital letters on the back of the laptop, which is on display.

Equipment and Instruments for Disassembling:

Electrostatic discharge (ESD) gear is strongly advised for your safety and the safety of others in the work area. Proper usage of this tool will assure practical repair work and help decrease repair expenses. Disassembly equipment and tools include the following:

  • One Phillips screwdriver, 2 mm
  • One screwdriver with a flat blade of 4 mm Torx driver Precise forceps 
  • Mats with anti-static properties 
  • A wrist band or heel grounder for ESD
  • Carpets or floors that are anti-static
  • Ionizers for the air (for electrostatic sensitive areas)
  • A card made of plastic 
  • A stick made of plastic

How to Disassemble Toshiba Satellite C655 Laptop?

The following guide will provide detailed information on How to Take Apart a Toshiba Laptop C655?

Phase#1 Disassembly of the Memory Module:

Step#1: Invert the computer.

Step#2 Remove the screw locking one memory module cover.

Step#3 Remove the lid from the memory module.

Phase#2 Disconnect the HDD:

Step 1: Undo the single HDD cover screw that secures the HDD cover. Unscrew the M2.5×3 black square head screw that secures the hard disc drive pack.

Step 2: Release the HDD unit by pushing it in the direction indicated by the arrows.

Phase#3 Disassembly of the Keyboard and the RTC Battery:

Step 1: In the following order, remove the following 13 locks on the keyboard cover; One latch on the right-hand side, one latch on the left side, Five locks on the bottom, and six locks on the front.

Step 2: Uncover the keyboard by removing the keyboard cover.

Step 3: Unscrew four black M2.5×2.5 flat head screws.

Step 4: Unplug the keyboard cord from the CN250 connector on the computer motherboard.

Step 5: After unplugging the cord take your laptop away.

Step 7: Using a plastic stick from the battery locker’s left hole, raise the RTC battery.

Step 8: Disconnect the RTC battery.

Phase#4 Elimination of the WLAN Card:

Step 1: Using tweezers, separate the two antenna cables.

Step 2: Unscrew one M2x3 black flathead screwdriver screw holding the WLAN card in place.

Step 3: Raise and slant the WLAN card away from the CN300 on the motherboard.

Read Also: How to Use a Laptop Hard Drive in a Desktop

Phase#5 Disassembly of the Top Cover:

Step 1: Invert the computer and extract the following twenty screws; Sixteen black M2.5×6 flat head screws and four M2x2 flat head screws in black.

Step 2: Reverse the computer’s orientation.

Step 3: Disconnect the flat cable from the touch control board from the CN280. Then detach the flat cable from the power board from the CN200.

Step 4: Unplug the speaker cord from the CN610.

Step 5: At the end Lift the top cover upward.

Phase#6 Disassembly of the Display Assembly:

Step 1: Invert the PC and unscrew two black M2.5×6 flat head screws.

Step 2: Reinstall the computer in its regular location and uncover the display panel.

Step 3: Remove the LCD/FL wire from the system board’s CN3001 connector.

Step 4: Remove the four black M2.5×6 flat head screws that secure the LCD unit to the bottom cover.

Step 5: Unplug the wireless antenna cables from the underside of the bottom surface.

Step 6: Uninstall the display module.

Phase#7 Disassembly of the System Board:

Step 1: Remove the system board’s M2.5×6 black flathead screwdriver screw.

Step 2: Disconnect the DC-IN wire from the CN6000 and remove it from the bottom cover.

Step 3: Unscrew one M2x3 black flathead screwdriver screw used to secure the FAN.

Step 4: Take apart the system board.

Phase#8 Remove the Cooling Unit and Fan:

Step 1: Disconnect the fan cord from the CN4300 located on the system board.

Step 2: Remove the fan’s two M2x5 white flathead screwdriver screws.

Step 3: Disconnect the fan.

Step 4: Remove the bracket’s two M 2 by two black hex nut screws and then discard the bracket.

Step 5: Loosen four screws from the CPU conditioning module bracket in the sequence shown on the shelf and then remove the frame for the CPU cooling module.

Step 6: Disconnect the cooling module from the CPU.

Phase#9 Disconnecting the CPU:

  • Tear away the mylar from the CPU.
  • With a flat-blade screwdriver, unlock the CPU by moving the camshaft on the Circuit board 120 degrees to the left.
  • Now you can Disconnect the CPU.

Phase#10 Elimination of the Display Mask:

  • Peel away four sealer tapes and unscrew the display mask’s four M2.5×5 black hex nut screws.
  • Place your thumb between the display mask’s edge and the LCD and detach the panel mask while unlatching it.

Phase#11 Remove the LCD Display:

Step 1: Release adjusting screw from the screen bezel’s lower side. Two stickers conceal these screws.

Step 2: Begin by detaching the display bezel from the rear cover on the display assembly’s upper side.

Step 3:Start removing the bezel from the sides of the display.

Step 4: Altogether remove the bezel.

Step 5: Four screws that secure the LCD to the rear cover should be removed.

Phase#12 Disconnect the Wire From the Power Button Device:

Toshiba Satellite C655 motherboard replacement

Step#1 Disconnect the wireless card’s antenna cord from the Wi-Fi card.

Step#2 Disconnect the USB cord from the board.

Step#3 Take off one of the screws that secure the mainboard to the top casing.

Step#4 Disconnect the rear cover from the screen to access the back’s video cable connector.

Step#5 Remove the adhesive tape to secure the connection and disconnect the video wire from the screen.

Step#6 Should remove three screws holding the Display screen to the rightmost bracket.

Step#7 Should remove three additional screws from the left frame.

Step#8 Now you may detach the LCD screen and, if required, put in a new one.

Phase#13 Detachment of the ODD Drive:

  • Only if the ODD drive fails should it be disassembled or replaced.
  • Unscrew two black M2x3 flat head screws.
  • Discard the bracket.

Phase#14 Remove the Touchpad Cable:

  • Release the touchpad cord by pushing the connection’s latching tab (red arrow). It will pivot open to a 90-degree angle.
  • Disconnect the touchpad cord from the link.

Phase#15 Take Away the Keyboard:

Step 1: The four screws that secure the keypad to the hand rest should be removed.

Step 2: Lift the keyboard slightly from the top and move it toward the screen, revealing the locking connector beneath the keyboard.

Step 3: Gently press the securing connector’s lock against the display at the left and in suitable locations

Step 4: Remove the now-unattached keyboard cord from the connection.

Phase#16 Take Away the Fan:

  • Should remove two silver-colored fans screws.
  • Remove the single black fan screw.
  • Disconnect the fan cord.

Disclaimer

DO NOT open the case if your laptop is still covered by warranty. To use this, you must know how to use a computer and no longer have a warranty. Use these guidelines at your own risk, as they could harm your computer.

FAQs – How to Disassemble Toshiba Satellite C655 Laptop?

What Is the Procedure for Removing the Heatsink From Toshiba Satellite C655 Laptop?

The four screws that secure the coolant to the mainboard should be removed. Remove the CPU, RAM, and, if desired, the clock battery at this point. Then The first two should be installed in the rebuilt motherboard. You’re finished.

What Is the Best Way to Repair Our Toshiba Satellite C655 Laptop?

To shut off the laptop, press the power button. Unplug the power and gently remove the battery. For approximately 30 seconds, press and hold the power button. Reconnect the power cable and replace the battery. Wait until the laptop is ultimately charged. Reboot the Toshiba laptop if it has been idle for an extended period.

Is It Possible to Fix a Toshiba Laptop?

Toshiba is the best manufacturer of laptops, desktop computers, and other consumer electronics. Throughout the country, places are accessible to diagnose and repair Toshiba devices. Indeed, with years of expertise with this brand, maintenance and replacements are straightforward.

Conclusion

So, in this guide, we have step by step discussed How to Disassemble Toshiba Satellite C655 Laptop? Of course, if your Toshiba Satellite laptop has an issue, it is recommended to take it to a repair shop. But if you want to fix the issue on your own, you should deeply study the steps mentioned above to disassemble the laptop; otherwise, you will create another big problem while selecting the smaller one. Therefore, we hope this essay was beneficial to you.

Read More